DIY Intermediate, Hands & Feet, Lotions & Butters, The Scrub Me Down Kitchen

DIY: Mangotastic Hand Butter

You know how it is. Your hands are dry, scaly so you reach for your awesome shea butter based body butter and apply it whilst sighing that your hands shall be smooth one again. You go to sleep, wake up and feel up your hands. YAY! All is good. So you go to wash up for the day, and apply more body butter to your hands, rub it in and off you go!

IMG_1109
Look at that hunk of awesome! Mango Butter! 

Only, you begin to see greasy hand prints everywhere. Elevator doors, your door handles, your floor (I sit on the floor a lot with work), your coffee cup, steering wheel (if you drive), everywhere! But your hands are nice and soft! But your hand prints are everywhere! Let’s not begin to talk about how my phone screen or key board look these days. So how to fix this?

Shea butter is an awesome ingredient that I have been recently been enjoying playing with and adding into various products but always in small amounts. But my hands take a beating with all I do and need something with a little more oomph but less shea butter grease. But something with all that shea goodness. 

What does that leave us with? Why mango butter of course!

IMG_1113
I think all butters and lotions once mixed look fantastic! 

Shea butter contains oodles of fatty acids which help to keep the skins elasticity and moisture. High in oleic and stearic acid, which are fantastic in keeping the skin moisturized which has an awesome side effect. Highly moisturized skin looks healthy and healthy skin looks younger. And has oodles of Vitamin E. And mango butter contains pretty much all the same awesomeness as shea butter… only not greasy! The glory that is mango butter is that mango butter is a “dry” butter. As in it sinks in pretty quickly not that it dries you out. It doesn’t. Really. It just sinks in fast leaving your skin soft and supple.

 

IMG_1132
Mango Butter is three times the cost. So don’t spill any on your counter tops. D’uh!!!

But mango butter is three times the cost. So, that is something to be aware of. I’ve worked with it a lot in the past, especially in a lot of hand butters as it sinks in very quickly, and the usual usage rates for emulsified body butters is at 15%. Following the “cheatsheet” for emulsified body butter is great, but I like to toss it out the window when playing in my kitchen. I wanted something with less liquid oils, more butter and more frothy/fluffy than a creamy butter. So I upped it to 20%. But I reduced the liquid oil to 7% from 12%. But that is the fun of making your own stuff! Play with the ratios, but just make sure you know how your emulsification system works and what it can handle.

IMG_1121
Look at that nice thick goodness and all those stiff peaks? NICE!!!

I’ve also added in sweet almond oil, Vitamin B5, Vitamin E and aloe vera juice. If you want this butter to have an even faster sink in rate, try switching out the sweet almond oil for hazelnut or apricot oil. For my ewax, I decided to use Emulsifying Wax NF. I really like how this ewax thickens up over 48 hours.  For my scents for this recipe I was torn between using mango fragrance oil or vanilla. I much prefer lighter and softer scents to the WHAMO full on powered scents. So if you prefer the WHAMO scents, check with your manufacturer’s recommended usage rates.   At the end of the day? I went with Mango Fragrance Oil from FNWL it is a really nice one! 

IMG_1120
My new 60g glass pots. 

I decided to make 500g as then I’d be able to fill up some of my new glass pots for gifts and still have enough left over for me to play with. When you work with larger sized batches, you need to be aware that your liquid phase might evaporate! Into this size batch, it’s pretty easy to figure out.  Before pouring Beaker A into Beaker B, be sure to weigh it. You should have made notes before about the total weight, so you should be able to see quickly if the numbers work out. Into this recipe I added in 8g of water to make up for 8g of liquid that evaporated. 

IMG_1134
This one is for my bathroom

The process for making a butter is basically the same as for making a lotion. You weigh, heat, blend, stir/mix, allow to cool, mix, add in stuff, stir, cool, decant, cap. And that’s about it! Very easy!

So let’s get cooking!

Screen Shot 2017-12-10 at 12.55.10 PM

Prepare your work space by wiping everything down with a 10% Bleach solution. Wipe all your equipment, tools, beakers down with isopropyl alcohol. Don’t forget your immersion blender, countertop AND your scales.

  1. Grab three beakers (or heat resistant pyrex measuring cups, I just really like my beakers), your double broiler, scale, spoons, immersion blender, ingredients, pots, and spatulas.
  2. Into Beaker A: your liquid phase. Weigh out your water, aloe juice, glycerine and silk.
  3. Into Beaker B: your oil phase. Weigh out your butter, oil and ewax.
  4. Into Beaker C: your additives. Weigh out your panthenol, Vitamin E, fragrances (if using), and preservatives.
  5. Place Beaker A and B into a double boiler on a barely there simmer until everything is melted. Give it about twenty minutes.
  6. Remove Beaker A from the double boiler, wipe off the bottom, and slowly pour the contents into Beaker B. Use your immersion blender to blend everything together.
  7. Blend again making sure that you have blended enough, then allow to cool for about twenty minutes, then blend again. Repeat as necessary until your butter has cooled to room temperature. Be aware that your butter may not be as thick as you’d like it to be at room temperature. Do not worry! Some ewax takes a few days to thicken up.
  8. Once your butter has reached room temperature, add the contents of Beaker C to your butter and blend for the final time. Ensure you have blended thoroughly.
  9. Decant into clean pots and enjoy!

IMG_1124

 

IMG_1126
The work lights I use in my kitchen are the “warm” coloured lights as they don’t hurt my eyes. So all my lotions come out looking very pretty in photos! 
Advertisements